Despite its dimensions, every model incorporates the best in technology

NERO: Trailed disc harrows V-shape SV

Share |
TRAILED V-SHAPE DISC HARROWS
TRAILED V-SHAPE DISC HARROWS

Technology applied in trailed disc harrows is the same as the one employed in bigger machines and for big areas.

Trailed disc harrows, suspended to the three points of the tractor, are strong and solid machines, very small and projected to adapt to vineyards and orchards which soil is particularly irregular and stony.

The small dimension favours to work fast and to work all over the whole surface without leaving any areas uncultivated.

Standard equipment

  • BEARINGS TRAILED DISC HARROWS

    Self aligning ability bearing. Nor maintenance or lubricant are required.
    Squared axle 30x30mm.

    SELF ALIGNING BEARING

  • BEARINGS DISC HARROWS

    Waterproof ball bearing.  Squared axle 30x30mm.

    SELF ALIGNING BEARING

  • BEARINGS TRAILED DISC HARROWS

    Waterproof double conical bearings are employed to difficult particles to penetrate inside damaging the bearing. This way they ensure the machine to work properly. A little tube on the top of the bearing, for the introduction of lubricant, makes the periodic maintenance easier.
    Discs squared axle 40x40mm.

    DOUBLE CONICAL BEARING

  • DISCS SPACING TRAILED DISC HARROWS

    Disc spacing allows mix the soil perfectly, even in presence of great quantities of stubbles.
    180mm. >DISCS 22''/560mm.
    225mm. >DISCS 24''/610mm.
    240mm. >DISCS 26''/660mm.

    DISCS SPACING NERO

  • ADJUSTABLE AND STRENGHTENED FRAME TRAILED DISC HARROWS

    All trailed disc harrows are strengthened in the 3-point hitch. This way the frame cannot suffer any deformation during the labor, even when submitted to the most extreme conditions of work.
    Besides, they are adjustable in the height of the hitch so to adapt to the soil they have to work in.

    ADJUSTABLE AND STRENGHTENED FRAME

  • SCRAPERS DISC HARROWS

    All Gascón International disc harrows are equipped in origin with adjustable scrapers, one for each disc. Scrapers allow keeping discs clean.

    ADJUSTABLE SCRAPERS

Options

  • BEARINGS DISC HARROWS

    Bearing protection. Squared axle 30x30mm. Bearing protections avoid premature usury for friction and they avoid the earth enter inside the bearing.

    BEARING PROTECTION 30

  • DISCS SPACING TRAILED DISC HARROWS

    Discs spacing recovers special importance in the quality of the labour executed. When originally calibrated at 180mm., it is possible to increase it to 225mm. as an option.

    DISC SPACING INCREASEABLE

  • QUICK HITCH SUBSOILERS

    QUICK HITCH

  • LEVELLING DISCS DISC HARROWS

    Levelling disc is mounted on the tip of the rear train of discs. This way it takes the land rejected by the front train of discs and levels ruts opened by the last disc of the rear train of discs.

    LEVELLING DISCS

  • WARNING LIGHT DISC HARROWS

    Warning lighting is required in order to travel on the road.

    WARNING LIGHT KIT