Top quality finishing, long duration, least maintenance. For exacting people

AKER: V-shape subsoilers from 1 to 11 shanks

Share |

Gascón International V-shape subsoilers allow to obtaining a very good sowing bed with the least effort and very little fuel.

Gascón has got a wide range of models from 1 to 11 shanks, of different structures, each of them very strong: from 180x100x8mm. to 540x160x10mm. The weight goes from 150Kg. to 2100Kg.

This way V-shape subsoilers respond to the needs of every culture and soil. No matter the geography.

V-shape subsoilers manage to reach a working depth of about 65cm. and have an important fuel saving.

The ergonomics of shanks, the positioning along the frame, as well the rows spacing are the key for breaking the compacted soil and favour the formation of water reserves in depth and significantly reduce the stagnation of the water in the surface.

Rollers by Gascón are an important complement when you want to pulverize, level the soil and reduce damp loss, as well as adjust working depth.

Standard equipment

  • STRENGHTENED 3-POINT HITCH SUBSOILERS

    All Gascón International V-shape subsoilers are strengthened in the 3-point hitch – as well as in the seat of the shank. This way the frame cannot suffer any deformation during the labor, even when submitted to the most extreme conditions of work.

    STRENGHTENED 3-POINT HITCH

  • SHANKS SUBSOILERS

    The ergonomics of Gascón shanks is the correct one to break the compacted soil and favour the formation of water reserves in depth, reducing significantly the stagnation of water in the surface. As a consequence of that, also the angle attack of Gascón shanks is the correct one to easy penetrate into the soil, raise only little land from subsoil to the arable cap in surface, turn very little the surface, always requiring only the least amount of horsepower of the tractor. The distance between shanks, its characteristic disposition along the frame, as well as frame clearance contribute to the obtention of the over mentioned performances.

    SHANKS

  • ADJUSTABLE DEPTH SHANKS SUBSOILERS

    Gascón subsoilers shanks are all adjustable in the height of the depth. Shanks may have 3 or 4 grooves for the control of the depth penetration in the soil. Under specific requirement it is possible to increase the number of grooves. In addition, Gascón shanks have got a ring which makes the movement of the shanks easier, in order to reach the depth desired.

    ADJUSTABLE DEPTH SHANKS

  • FRONT SHARPENED SHINS SUBSOILERS

    Front sharpened shins are fixed in the extremity of shanks to avoid the deterioration of the material of the shank and to increase the volume of the soil moved during the labour.

    FRONT SHARPENED SHINS

  • STANDARD POINTS SUBSOILERS

    Gascón International mounts standard points in origin because they are the best option to assure a very good penetration. Standard tips break the compacted soil and turn the soil in the surface only minimally.

    STANDARD POINT

  • LABOUR DEPTH CONTROL SUBSOILERS

    Labour depth control is done through the regulation of roller working depth.

    LABOUR DEPTH CONTROL

  • ADJUSTABLE HITCH SUBSOILERS

    Gascón International V-shape subsoilers are adjustable in the height of the hitch so to adapt to the soil they have to work in.

    ADJUSTABLE HITCH

  • SPIKED ROLLER SUBSOILERS

    Gascón spiked rollers have got one block axle which crosses the roller from one extremity to the other. The use of self aligning

    double row balls bearings maintains unaltered the position of the roller - in case the axle should result damaged - in order to allow continuing to execute the labour properly. Spiked rollers pulverize, level the soil and reduce damp loss.

    SPIKED ROLLER

  • PARKING STAND SUBSOILERS

    All Gascón International V-shape subsoilers are equipped in origin with a parking stand.

    PARKING STAND

Options

  • EXCAVATOR POINTS SUBSOILERS

    Gascón International mounts standard points in origin because they are the best option to assure a very good penetration. Tips break the compacted soil and turn the soil in the surface only minimally.

    EXCAVATOR POINTS

  • WINGED POINTS SUBSOILERS

    Gascón International mounts standard points in origin because they are the best option to assure a very good penetration. Tips break the compacted soil and turn the soil in the surface only minimally.

    WINGED POINTS

  • MULTI POSITIONS FRAME SUBSOILERS

    In order to obtain the best performances from each exploitation, Gascón International offers the possibility to ask for a frame with multi positions in all the subsoilers  from 3 to 11 shanks.

    MULTI POSITIONS FRAME

  • FRONT DEPTH CONTROL WHEELS 10.0/75-15,30 SUBSOILERS

    FRONT DEPTH CONTROL WHEELS 10.0/75-15,30

  • QUICK HITCH SUBSOILERS

    QUICK HITCH

  • ROUND CAGE ROLLER SUBSOILERS

    Gascón International round cage rollers have got one block axle which crosses the roller from one extremity to the other. The use of self aligning double row balls bearings maintains unaltered the position of the roller - in case the axle should result damaged - in order to allow continuing to execute the labor properly. Rollers pulverize, level the soil and reduce damp loss.

    ROUND CAGE ROLLER

  • FLAT CAGE ROLLER SUBSOILERS

    Gascón International flat cage rollers have got one block axle which crosses the roller from one extremity to the other. The use of self-aligning double row balls bearings maintains unaltered the position of the roller - in case the axle should result damaged - in order to allow continuing to execute the labor properly. Rollers pulverize, level the soil and reduce damp loss.

    FLAT CAGE ROLLER

  • WARNING LIGHT KIT SUBSOILERS

    WARNING LIGHT KIT

Video gallery